RUUD® Endeavor® Multi-Purpose Air Handler, Series: RH2TY, 2 ton Nominal Capacity, 24000 Btu/hr Cooling Capacity, 208-240 V, 3 A, 249 W Wattage, 1/3 hp, 60 Hz, 1 ph, 300 to 1100 rpm Rotational Speed, 800 cfm, Configuration: Downflow, Horizontal Left, Horizontal Right, Upflow, 13.4 to 16 SEER, FNPT Connection, R-454B Refrigerant, 15 A Fuse Rating, 3/4 in Connection, 3/8 in Liquid Line, 3/4 in Suction Line, 16 x 20 in Filter, 2 Stages, 4 Speed, Constant Torque ECM Motor, Steel, 42-1/2 in H x 17-1/2 in W x 21-11/16 in D, Additional Information: Standard Efficiency, TXV Metering Device, Non-Communicating Control
Note: TACL and EPA license required to buy refrigerant and refrigerant bearing equipment, RUUD® not available in Houston locations
| Configuration | Downflow, Horizontal Left, Horizontal Right, Upflow |
| Connection Size | 3/4 in |
| Connection Type | FNPT |
| Cooling Capacity | 24000 Btu/hr |
| Dimensions | 42-1/2 in H x 17-1/2 in W x 21-11/16 in D |
| Filter Size | 16 x 20 in |
| Fuse Rating | 15 A |
| Liquid Line Size | 3/8 in |
| Material | Steel |
| Motor Type | Constant Torque ECM |
| Nominal Capacity | 2 ton |
| Number of Speeds | 4 |
| Number of Stages | 2 |
| Refrigerant Type | R-454B |
| Rotational Speed | 300 to 1100 rpm |
| SEER Rating | 13.4 to 16 |
| Series | RH2TY Series |
| Suction Line Size | 3/4 in |
| CFM Rating | 800 cfm |
| Voltage Rating | 208-240 V |
| Amperage Rating | 3 A |
| Wattage | 249 W |
| HP Rating | 1/3 hp |
| Frequency Rating | 60 Hz |
| Phase | 1 ph |
- Quiet Operation: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
- Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
- Versatile 4-Way Convertible Compact Design: Allow for upflow, downflow, horizontal left and horizontal right applications even in the smallest of spaces
- Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
- Field Installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
- Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
- Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems, This new requirement will result in a 78% lower GWP than previous-generation refrigerants - with only minimal changes to system installation, For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
- PlusOne® Refrigerant Detection System™: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation - if excess refrigerant is detected
Specification Sheet
