ADP® Evaporator Coil, Series: HE Series, 60 MBtu/hr, Left Hand Cased, 19-1/2 in D Drain Pan Size, 2000 cfm CFM Rating, 3.5 to 5 ton, R-410A, 3/4 in, 7/8 in, FNPT, #93 Piston Size, 500 psi, Aluminum, 31-1/2 in H x 21 in W x 21 in D (Note: TACL and EPA license required to buy equipment)
| Configuration | Left Hand Cased |
| Connection Size | 3/4 in, 7/8 in |
| Connection Type | FNPT |
| Dimensions | 31-1/2 in H x 21 in W x 21 in D |
| Drain Pan Size | 19-1/2 in D |
| Piston Size | #93 |
| Pressure Rating | 500 psi |
| Refrigerant Type | R-410A |
| Series | HE Series |
| Tonnage | 3.5 to 5 ton |
| BTU Rating | 60 MBtu/hr |
| CFM Rating | 2000 cfm |
| Material | Aluminum |
- High-efficiency lanced fin design
- All coils have durable packaging with bar-coded labels on the box
- Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs and then charged with dry air
- Microban® anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
- UV-resistant drain pans are molded of high-temperature (450 deg F) engineered polymer
- Dual 3/4 in fpt condensate drains on front left and front right side of drain pans
- Patented HydroTEC™ low water retention drain pan
- Copper refrigerant connections for easy brazing on both copper and aluminum slab model
- Intertek lab tested 1% or less cabinet air leakage for better efficiency
- Cased coil cabinets are fully lined with 5/8 in foil faced insulation
- Short cabinet with easy access
- Non-captive refrigerant lines with long stubs make for easy installation
- Enhanced refrigerant pipe grommets secure, tight and easy to install
- Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
- Mounted inside cabinet to prevent external sweating
- Bulb clamped standard factory installed
- Cabinet insulation hold down tabs for easy drain pan removal
- Interlocking doors reduce air leakage and allow for easy access
- Foam drain seal for reduced air leakage
Instruction/Installation Manual
