JB machines all of the brass fittings at the factory in aurora, illinois using the highest level of brass, consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content and higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel and plastic tube provided an acceptable flare could be generated with the material. Vacuum pressures of 5000 lb/sq-in can be handled depending on the size, material and conditions.
JB Industries Reducer, Reducer Fitting, 3/8 in Connection Size 1, Connection Type 1: Female Flared, 1/2 in Connection Size 2, Connection Type 2: Male Flared, Female Flared|Male Flared Connection, Brass, Material Construction: Brass, 13/16 in Hex, 1.41 in L, -65 to 250 deg F
Fitting Type | Reducer |
Connection Size 1 | 3/8 in |
Connection Type 1 | Female Flared |
Connection Size 2 | 1/2 in |
Connection Type 2 | Male Flared |
Connection Type | Female Flared|Male Flared |
Material | Brass |
Material Construction | Brass |
Hex Size | 13/16 in |
Dimensions | 1.41 in L |
Temperature Rating | -65 to 250 deg F |
- Made in the U.S.A
- Make and break
- Good vibration-resistance improved by using long nuts
- Low cost
- Easy assembly