RUUD® Air Handler with TEV Metering, Series: RH1T, 4 ton Nominal, 48000 Btu/hr BTU, 208 - 240 VAC, 14.06 kW, 3/4 hp, 60 Hz, 1 -Phase, 1400 - 1600 cu-ft/min, 16 SEER, 3/8 in Sweat Liquid, 7/8 in Sweat Vapor Connection, R-410A Refrigerant, 1 -Stage, Steel, Pre-Painted, 21 in W x 50-1/2 in H x 21-11/16 in D (Note: TACL and EPA license required to buy equipment)
Dimensions | 21 in W x 21-11/16 in D x 50-1/2 in H |
Series | RH1T |
Nominal Capacity | 4 ton |
BTU Rating | 48000 Btu/hr |
Voltage Rating | 208 to 240 VAC |
Wattage | 14.06 kW |
HP Rating | 3/4 hp |
Frequency Rating | 60 Hz |
Phase | 1 ph |
Type | Air Handler |
CFM Rating | 1400 to 1600 cfm |
SEER Rating | 16 |
Connection Type | 3/8 in Sweat Liquid, 7/8 in Sweat Vapor |
Refrigerant Type | R-410A |
Number of Stages | 1 |
Material | Steel |
Finish | Pre-Painted |
- Attractive pre-painted cabinet exterior, rugged wall steel cabinet construction, designed for added strength and versatility
- 1 in foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
- Four leg blower motor mount, blower housing with controls, motor and blower
- Field convertible for vertical down flow, horizontal left hand or right hand air supply
- Three combustible floor base accessories fit all model sizes when required for down flow installations on combustible floors
- Indoor coil design provides low air side pressure drop, high-performance and extremely compact size
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing, coils are tested at the factory with an extensive refrigerant leak check, coils have copper sweat refrigerant connections, coils utilize chatleff metering device connections
- Molded polymer corrosion resistant condensate drain pan is provided for all indoor coils
- Front refrigerant and drain connections
- Constant torque(ECM), 5-speed blower motor
- Minor - major Series
- 19-3/8 in W x 19-3/4 in D return air opening
- 10 x 10 in blower
- 3/4 in FNPT auxiliary, primary drain connection
- 19-1/2 in supply duct