Mars® all angle outdoor condenser fan motors are designed for either shaft-up or shaft-down applications. End shields are enclosed for weather protection. A weep hole is provided in each end shield to allow condensate to drain. All of these motors are suitable for air conditioning or heat pump applications.
Mars® Condenser Fan Motor, 208 to 230 VAC, 2.4 A, 1/3 hp, 1075 rpm, 1 ph Phase, 60 Hz, Air Over Motor Enclosure, 48 Frame, 1/2 in Dia x 6-1/2 in L Shaft, Reversible Rotation, 1 Speed, Sleeve Bearing, Angle Mounting, B Insulation Class, 60 deg C, 5.5 in Dia x 11.73 in L
| Bearing Type | Sleeve |
| Dimensions | 5.5 in Dia x 11.73 in L |
| Mounting Type | Angle |
| Number of Speeds | 1 |
| Rotation Type | Reversible |
| Shaft Size | 1/2 in Dia x 6-1/2 in L |
| Temperature Rating | 60 deg C |
| Voltage Rating | 208 to 230 V |
| Amperage Rating | 2.4 A |
| HP Rating | 1/3 hp |
| Speed Rating | 1075 rpm |
| Phase | 1 ph |
| Frequency Rating | 60 Hz |
| Motor Enclosure Type | Air Over |
| Frame Size | 48 |
| Insulation Class | B |
- Reversible rotation
- All angle, sleeve or ball bearing
- Rheem® mounting holes with screws installed
- Water slinger on shaft
- Through-bolt or band mounting
- Capacitor requirement noted on motor label
- Double full flatted shaft
- Capacitor 7.5 uF at 370 VAC
- Vertical Shaft Up or Shaft Down
- Weep hole in each end shield
- Thermally Protected
- Extended Studs/Belly Band/Mounting Holes
Mars Motor Cross Reference
