JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high-tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All valves are equipped with cap and one valve core (braze-type, loosely assembled). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkylates and diluted mineral acids.

JB Industries Pipe Tee, Tee Fitting, 1/8 in Connection Size 1, Connection Type 1: MNPT, 1/8 in Connection Size 2, Connection Type 2: MNPT, Connection Size 3: 1/8 in, Connection Type 3: MNPT, MNPT|MNPT|MNPT Connection, 7-1/4 in Length, Brass, Material Construction: Brass, 5 in H x 3-1/4 in W, -40 to 250 deg F

• Add multiple ports with just one fitting
• The swivel flare connections offer a safe, simple installation without the need for brazing
• Flare ends are tapped to receive access cores
• One core and cap are packaged with each valve

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/JB_Industries_U4_6_Catalog.pdf