The HX Series is compatible with most split system condensing units and heat pumps. All HX fan coils include a 240/24 V transformer and are completely prewired with 0 to 10 kW of electric heat. A sloped drain pan allows positive drainage of condensate for HX fan coils factory installed within an enclosure, add -C after the kW in the Model number. For instance, ordering Model 18HX5-C will include an 18HX5 factory installed in a 9EHX01 enclosure. A optional solid or louvered panel can be used with the C model.

First Co.® Horizontal Fan Coil, Series: HX Series, Model: R410 TXV, 240 V, 27 A, 6 kW, 1/4 hp HP Rating, 24000 Btu/hr, 800 cfm CFM Rating, NPT, 35 A Fuse, 3 ton, Ceiling Mount, Aluminum, 43-1/4 in Overall Length, 11-3/8 in Overall Width, 10 in Overall Height, Additional Information: 10 in H x 43-1/4 in W x 21 in D Dimensions

• Drain pan has 3/4 in NPT primary and secondary (overflow) fittings 240 V motor, 24 V controls
• Highly efficient copper tube/aluminum fin heating and cooling coils. Cooling coil has a piston-type metering device or factory or field installed R410A TXV (non-bleed type)
• Insulated and coated galvanized steel drain pan is sloped for proper drainage
• Cabinet air leakage is no more than 2% when tested in accordance with ASHRAE 193
• Attractive off-white return air/access panel with captive screws
• IAQ filter panels
• Fully insulated enclosure with matching ceiling panel (enclosure can be pre-installed), also allows for ducted return air
• Heat pump kit - for all HX Models with electric heat (#942-1) (field installed)
• Factory or field installed R410 TXV (non-bleed type)
• Condensate overflow switch (# SS3) (field installed)
• Enclosure cap kit - for ceiling installation