Reflectix duct insulation consists of two-layers of highly reflective film, reflectivity that are bonded to two-tough layers of polyethylene. Two-inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and strength. The product has a tape running the length of the roll for easy identification by code officials. The tape identifies the manufacturer and ASTM testing 3A reflectix duct insulation. A2 ASTM E84 E280A2 class a 2F class 1 E2 80 A2 ASTM C411 Passed 2E. The product will provide an R 42E2 2CR 52E6 or R 6 2E0 2C depending on the installation.
Reflectix Duct Wrap Insulation, 100 ft Length, 48 in Width, 5/16 in Thickness, R-Value: R5.6, -60 to 180 deg F, 400 sq-ft Coverage Area
Coverage Area | 400 sq-ft |
R-Value | R5.6 |
Length | 100 ft |
Width | 48 in |
Thickness | 5/16 in |
Temperature Rating | -60 to 180 deg F |
- Non-toxic/non-carcinogenic
- Fiber-free
- Lowers heating and cooling costs year round
- Reflects 94% plus radiant heat
- Costs less to install
- Lightweight and clean
- Does not promote nesting of insects or rodents
- Resists growth of fungi, mold and mildew
- Does not require protective clothing or respirators to install
- Not affected by moisture or humidity
- Less than 25 flame spread index
- Less than 50 smoke developed index
- 0.02 water vapor transmission
- Less than 0.06 emittance
- 3.7 N-mm tensile strength
- 60 in-lb puncture-resistance