Fast-Stat Wire Extender, 24 VAC, 2 amp, Black, 1-1/2 Inch Length, 4-3/4 Inch Width, 4-3/4 Inch Height, R, W, Y, G Terminal Designation
|
Brand Name
|
Fast-Stat
|
|
Item Name
|
Wire Extender
|
|
Voltage Rating
|
24 VAC
|
|
Amperage Rating
|
2 amp
|
|
Color
|
Black
|
|
Length
|
1-1/2 Inch
|
|
Width
|
4-3/4 Inch
|
|
Height
|
4-3/4 Inch
|
- The model 1000 adds one wire to any system
- It can be used for thermostats that need a common connection, adding fan or humidity control and many other uses
- It is also used to install a 2-stage A/C when there is only a 2-wire condenser cable but 4-wires are needed
- Fast-Stat wiring extenders electronically add more wires to a control cable
- Saves significant time and expense as compared to repulling of new cables
- Causes no damage to walls or ceilings as compared to access holes that are often needed when re-pulling cables
- The sender and receiver communicate over the existing thermostat cable and/or outdoor unit cable
- Not a wireless system and therefore avoids all the problems that wireless systems may have
- No batteries required, all Fast-Stat models are powered by the existing 24 volt transformer
- Compatible with all conventional wiring systems using R, C, W, W2, Y, Y2, G, O/B and other terminals
- Works with old and new systems, can be connected to older systems such as thermopile millivolt, standing pilot systems, intermittent pilot controllers, fan centers, etc.
- Can be used with oil burners, zone controllers and other systems that require "dry contact switching"
- Works over long cable lengths upto 500 feet and more
- FAST-STAT Wiring Extenders do not produce interference with other electronic devices nor are they affected electronic devices that produce large amounts of interference
- Many Fast-Stat wiring extenders can be used in the same building or complex without interference between units
- Low power use, most FAST-STAT models use less than 3 watt of power
