SoftTouch™ duct wrap insulation offers outstanding thermal properties that reduce unwanted heat loss or gain and condensation during system operation. This blanket-type insulation is used to insulate rectangular and round heating, ventilating and air conditioning ductwork. It is manufactured with glass fibers bonded together with a sustainable plant-based binder system. Sheet metal ductwork can be insulated by providing an insulating blanket on the exterior of the duct. An insulating blanket provides resistance to heat loss or gain from the air moving through the ductwork. Duct wrap also provides a vapor retarder outer jacket (as an unfaced blanket or with an FSK, gray PSK or white PSK vapor retarder facing), which prevents condensation inside the insulating blanket or on the duct metal surface itself. They are available in 48 in and 60 in W to reduce installation costs. On faced products, a taping tab is provided on one edge for ease of installation.
CertainTeed® Duct Wrap Insulation, 75 ft Length, 48 in Width, 2-1/8 in Thickness, Density: 0.75 pcf, R-Value: R6, Fiberglass Insulation/Foil Scrim Kraft Jacket, 35 to 250 deg F
| Density | 0.75 pcf |
| R-Value | R6 |
| Length | 75 ft |
| Width | 48 in |
| Thickness | 2-1/8 in |
| Material | Fiberglass Insulation/Foil Scrim Kraft Jacket |
| Temperature Rating | 35 to 250 deg F |
- Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork, this means a likely savings of energy and improved system performance
- When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces
- Duct wrap products are now made with SoftTouch™ for a softer, less itchy product
- 25 max flame spread index, 50 max smoke developed index
Catalog