piwik image

Uniweld® NV1 | Insco Distributing
Send Print
  1. pin-int

UNIWELD® Nitrovue Nitrogen Flow Indicator, 1/4 Inch, Female Flared CGA Inlet x Male Fl...

  • Brand Name: Uniweld®
  • IPN: NV1-UNI
  • MPN: NV1
  • Login for Availability $locale.get('product.label.hazmat')

NitroVue simplifies the purging of nitrogen during the brazing of copper tubing in Air Conditioning and Refrigeration systems with an easy to read flow indicator label and a precision adjustable valve to control the low flow of nitrogen gas. The bright orange float ball and tube are fortified and protected in the aluminum body with wide open windows for a clear view. The easy to see orange float ball visually confirms the nitrogen is flowing and allows the technician to first PURGE the copper lines at 20+ SCFH and then reduce the flow to BRAZE at 3-5 SCFH during the brazing process thus conserves its consumption and reduces operating cost. The nitrogen must be flowing to displace the oxygen inside the tubing during the brazing process, preventing internal oxidation and the resulting scale. Scale build up inside the tubing can cause blockage in the TXV and within the Air Conditioning and Refrigeration system resulting in premature failure. If the ball does not rise in the tube there is no flow of nitrogen only static pressure and oxygen is not being displaced. The NV1 must be connected to a Nitrogen Regulator with the delivery pressure set at 60 PSI to control the nitrogen gas pressure. The NV1 is protected from over pressure with a reseatable safety blow off that opens at 200+ psi.

Uniweld Nitrogen Flow Indicator, 1/4 Inch Fitting, Female Flared CGA Inlet x Male Flared Outlet

Brand Name       Uniweld®
Sub Brand       Nitrovue
Item Name       Nitrogen Flow Indicator
Fitting Size       1/4 Inch
Connection Type       Female Flared CGA Inlet x Male Flared Outlet
  • Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas
  • Bright orange float ball visually confirms the flow of nitrogen gas
  • Purge the copper lines at 20 + scfh and then reduce the flow to Braze at 3 - 5 scfh during the brazing process
  • Protected from over pressure with a reseatable safety blow off that opens at 200 psi
  • Nitrovue with 1/4 Inch flare fittings